Fiber-reinforced, polymer-modified cementitious mortar, for the installation and the surface-reinforcement of thermal insulation boards on buildings’ facades.
It exhibits high bonding strength on the thermal insulating boards, excellent adhesion to the substrate, elasticity and resistance to moisture and frost.
Produced in two different grain sizes: FINE (0,4mm) and COARSE (1,2mm), depending on the type of thermal insulation boards and the work requirements of each project.
Classified as general purpose cementitious mortar type GP CSIV, W2 according to the European standard EN 998-1.
FC 1100 THERMO•FIX is used in combination with the FC 1200 and FC 1300 renders for the external thermal insulation of the facades of the buildings.
It is suitable for the installation and reinforcement of thermal insulation boards from expanded or extruded polystyrene, mineral wool, etc., on facades of buildings.
Additionally, reinforced with fiberglass mesh CLIMA•NET 160g/m2, it is applied on the exterior surface of the installed thermal insulation boards creating the ideal base-coat for the subsequent finishing coat.
- As an adhesive: approximately 4-6 kg/m2.
- As a base-coat: approximately 1.5 kg/m2 for a 1mm thick layer.
Available in:
- 25kg paper bags
Storage: 12 months from production date, if stored in original, sealed packaging, protected from direct sunlight and moisture.
