KP 450 rapid

fast-setting polymer-modified tile adhesive - Type C2 FT

DESCRIPTION

Fast-setting, polymer-modified, cement-based tile adhesive.
It exhibits increased initial and final adhesion strength, no vertical slip and resistance to moisture
and temperature changes.
Tiled surfaces can be walked and grouted after 3-4 hours depending on ambient conditions.
Produced in white and grey.
Classified as C2 FT type cementitious adhesive according to European standard EΝ 12004-1.

APPLICATIONS

For the installation of absorbent (ceramic) and non-absorbent tiles (gres porcelanato), as well as decorative natural or artificial stones.
It is applied on walls and floors, on common substrates (e.g. concrete, floor screeds, masonry, renders, etc.).
Also on dry wall surfaces (gypsum-boards, cement-boards, fiber-boards, etc.). It is recommended, these surfaces to be treated with FINO•CONTACT primer before tile installation.
Also suitable for installing tiles over existing floors (old tile layers, terrazzo, etc.) provided that the surface is treated with a suitable primer.
It is ideal for cases where the surfaces must be used in a short time (store refurbishing, etc.).
Suitable for indoor and outdoor applications.

CONSUMPTION

Approximately 2-5 kg/m2 depending on the substrate’s roughness and the dimensions of the tiles.

PACKAGING - STORAGE

Available in:

  • 20kg paper bags (available from May 2024)

Storage: 12 months from production date, if stored in original, sealed packaging, protected from direct sunlight and moisture.